Antimagnetic Edge Finder Touch Point Sensor Optical Finder

Basic Info

Model NO.	PFT010
Customized	Non-Customized
Application	CNC Machining Center, Milling Machine
Model	Optical Edge Finder
Concentricity	0.005mm
Transport Package	Plastic Box
Specification	TUV, CE, ISO
Trademark	Perfect
Origin	Jiangsu Province, China
Production Capacity	1000PCS/ Per Day

Product Description

Suitable for CNC machining center and milling machine, measuring and setting the X and Y axes of workpieceThe 4mm probe is used for holes and narrow groovesThe photoelectric edgefinder is used for deep hole detection where visual vision is not possible.

Product features and instructions
1.10mm diameter can be installed on cutting head chuck or drill hole chuck (see figure 1)
2. Please gently press the side edge of the probe with your finger to make it 0.5mm off (see figure 2).
3. Make it rotate at 400-600rpm
4· small spring force can avoid small milling cutter or bit fracture
5. Make the probe touch the end face of the workpiece as shown in (figure 2), touch and move it bit by bit, and it will become as
shown in (figure 3). The probe will not vibrate, just like static state. This sliding start point is the desired reference
position
6 the end face position of the workpiece itself is the coordinate position of 5mm plus the probe radius

Model	Shank	Disc	Feeler pin	Repeatability	Description
MCE-420	Φ10MM	20MM	Φ4MM	0.005MM	Ordinary
MCE-1020	Φ10MM	20MM	Φ10MM	0.005MM	Ordinary
MCE-430	Φ10MM	20MM	Φ4MM	0.005MM	Antimagnetic(titanizing- yellow)
MCE-431	Φ10MM	20MM	Φ4MM	0.005MM	Antimagnetic(titanizing- black)
MCE-1025	Φ10MM	20MM	Φ10MM	0.005MM	Antimagnetic(titanizing- yellow)
MCE-1010	Φ10MM	ON	Φ10MM	0.005MM	Porcelainous
MCE-1030	Φ10MM	20MM	Φ10MM	0.005MM	Porcelainous